Chebyshev

RC Series

Frequency Range from 1 kHz to 200 MHz

Notch Filters are used to remove unwanted signals. Typical applications include filtering receivers that are so close to a transmitter that it swamps all other signals. Chebyshev Notch Filters are available for any center frequency from 1 kHz to 200 MHz.

TTE offers a low THD (low distortion) filter option for this series. Please refer to the Part Number Derivation section below where the “T” option is mentioned.

For an overview of TTE’s low THD filters please click here.

Series Number	Number of Pole Pairs (Elements)	Bandwidth Selection -3dBc
RC3	3 (6)	20% to 100% f_n
RC4	4 (8)	20% to 100% f_n
RC5	5 (10)	20% to 100% f_n
RC6	6 (12)	20% to 100% f_n

Notes:

Operating Temperature Range:
0°C to +70°C
VSWR at f_o: 1.5:1 Typical
Input Power: 20 mW

Part Number Derivation:

RC	6	*(T)	**(R)	-100M	-22M	-50	-69A
1	2	3	4	5	6	7	8

1. 1. Series, RC
    Number of poles, 6
    The “T” option specifies a filter with low THD for ADC/DAC testing. When selected therein, THD is > -80dBc, -96dBc typical.
    “R” RoHS compliant. Allow for longer lead time.
    The Notch Frequency, f_n
    The -3dBc passband bandwidth. It may also be specified as a percentage of f_n. Thus, instead of 22 MHz, use 22P.
    Terminations
    Case selection from the case selection guide. “T” option cases are larger than standard.

Downloads:

CALL FOR ASSISTANCE

For assistance please call 1-716-532-2234 or email us at tte@tte.com

MADE IN USA

All TTE products are Made in the USA. Most are delivered within 2-3 weeks. Expedited lead times of 3-5 days are available on many products.

REQUEST A QUOTE

TTE offers you several ways to obtain a filter specification quote. The easiest way is to use TTE’s Speed Quote below and submit it directly to TTE.