Chebyshev

HC Series

Frequency Range from 100 Hz to 7 GHz

Chebyshev Highpass Filters will have low passband ripple, ±0.25 dB typical. These filters are available for -3dB frequencies from 100 Hz to 4 GHz, covering AF, RF and microwave applications. Packages include PCB radial pins, SMT, SMA and BNC connectorized configurations.

TTE offers a low THD (low distortion) filter option for this series. Please refer to the Part Number Derivation section below where the “T” option is mentioned.

For an overview of TTE’s low THD filters please click here.

If you are involved with ADC/DAC testing in the GHz range, please refer to TTE’s technical tip entitled “The Need for High Frequency ‘Brick Wall’ Filters” for helpful information.

Series Number	Number of Poles
HC3	3
HC4	5
HC7	7
HC9	9
HC11	11
HC13	13
HC15	15
HC17 (NEW)	17

Notes:

Operating Temperature Range:
0°C to +70°C
VSWR at f_o: 1.5:1 Typical
Input Power: 20 mW

Part Number Derivation:

HC	11	*(T)	**(R)	-50M	-50	-65A
1	2	3	4	5	6	7

1. 1. Series, HC
    Number of poles, 11
    The “T” option specifies a filter with low THD for ADC/DAC testing. When selected therein, THD is > -80dBc, -96dBc typical.
    “R” RoHS compliant. Allow for longer lead time.
    f_-3dBc
    Terminations
    Case selection from the case selection guide. “T” option cases are larger than standard.

Downloads:

USE THE FILTERS BELOW TO FIND YOUR EXACT REQUIREMENT.

Showing 1 – 14 of 14 results Showing all 14 results Showing the single result No results found

Part Number	Insertion Loss	VSWR
BTHC-4G	0.7	1.50:1
BTHC-6G	0.7	1.50:1
BTHCR-4G	0.7	1.50:1
BTHCR-6G	0.7	1.50:1
BTHF-27G	1.3	1.50:1
BTHF-40G	2.5	1.50:1
BTHFR-27G	1.3	1.50:1
BTHFR-40G	2.5	1.50:1
BTS-11G	0.7	1.50:1
BTS-18G	0.7	1.50:1
BTS-5G	0.7	1.50:1
BTSR-11G	0.7	1.50:1
BTSR-18G	0.7	1.50:1
BTSR-5G	0.7	1.50:1

[prdctfltr_sc_products rows="4" preset="default" class="my-filter-class" action="https://www.tte.com/product-category/power" product_cat="power" show_products="no"]

CALL FOR ASSISTANCE

For assistance please call 1-716-532-2234 or email us at tte@tte.com

MADE IN USA

All TTE products are Made in the USA. Most are delivered within 2-3 weeks. Expedited lead times of 3-5 days are available on many products.

REQUEST A QUOTE

TTE offers you several ways to obtain a filter specification quote. The easiest way is to use TTE’s Speed Quote below and submit it directly to TTE.