Frequency Range from 100 Hz to 7 GHz
Chebyshev Lowpass Filters have low passband ripple of ±0.25 dB typical. These are available for -3dB frequencies from 100 Hz to 6 GHz, covering AF, RF and microwave applications. Packages include PCB radial pins, SMT, SMA and BNC connectorized configurations.
TTE offers a low THD (low distortion) filter option for this series. Please refer to the Part Number Derivation section below where the “T” option is mentioned.
For an overview of TTE’s low THD filters please click here.
If you are involved with ADC/DAC testing in the GHz range, please refer to TTE’s technical tip entitled “The Need for High Frequency ‘Brick Wall’ Filters” for helpful information.
| Series Number | Number of Poles |
|---|---|
| LC3 | 3 |
| LC4 | 4 |
| LC5 | 5 |
| LC6 | 6 |
| LC7 | 7 |
| LC8 | 8 |
| LC9 | 9 |
| LC10 | 10 |
| LC11 | 11 |
| LC13 | 13 |
| LC15 | 15 |
| LC17 (NEW) | 17 |
| LC | 11 | *(T) | **(R) | -50M | -50 | -65A |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
For assistance with LC15 and LC17 graphs please contact factory.
For assistance please call 1-716-532-2234 or email us at tte@tte.com
All TTE products are Made in the USA. Most are delivered within 2-3 weeks. Expedited lead times of 3-5 days are available on many products.
TTE offers you several ways to obtain a filter specification quote. The easiest way is to use TTE’s Speed Quote below and submit it directly to TTE.
