*These printed circuit cases are no longer standard cases. While they can be made available, delivery will be delayed and a recurring set-up charge does apply.
**Case 1245 does not have an isolated case pin as an option. Both ground pins are common-case.
At frequencies >300kHz or when the filter terminations are <300Ω’s, the case and common terminals are internally connected.
The case finish is copperplate per MIL-C14550 under fused tin plate per MIL-T-10727.
Tolerances are +/- 0.015”. All pin locations are referenced from the center lines.
Marking: only the input terminal is marked and that marking is on the top of the case.