|
||||
|
 |
 |
|
|
|
||||
|
||||
Established in 1956, TTE continues its pioneering leadership roll in the design and manufacture of RF and microwave Filters. TTE products include Bandpass, Lowpass, Highpass, Band Rejection and Cavity Filters at frequencies to 40GHz in some instances. The TTE products line includes diplexers and multiplexers as well. Also offered are Isolation, Matching and Balun transformers.
Low distortion filters are part of the TTE products line for ADC and DAC testing. The needed call out for low THD filters is listed in the bandpass, lowpass and highpass sections in the part number derivation section. The case selection guide does not apply to the low THD filters, as they require larger than standard cases. However, they are still available within 3 to 5 days from order.
For TTE products, you will notice a change in the PCB case sizes and pin layout for the higher frequency filters. These new cases offer 4 ground pins and 2 signal pins. The input and output are bi-directional and are not marked. The finish of these cases is fused tin plate over copper and the sides may be hand soldered to the boards for additional grounding.
The re-designed SMT cases in the TTE products line are all brass providing shielding on all six sides. These too are fused tin plate and may be hand soldered on the case sides for additional grounding. If at all possible, it is always better to hand-solder filters to your board whether they are PCB or SMT.
For assistance please call 310.478.8224 or email us at .
All TTE products are Made in the USA. 3-5 day shipping is standard for most frequencies.
Specifications and Prices:
TTE, Inc. reserves the right to discontinue any item or product without notice and to change any specifications at anytime without incurring any liability or obligation to produce such discontinued items.