| Case No. | A | B | C | T | S | X | BNC* | SMA* |
| 2A | 1.40" 30.48mm |
0.63" 16.00mm |
0.40" 10.16mm |
1.32" 33.53mm |
0.52" 13.21mm |
1-72 6 threads deep |
Jack/Jack | |
| 3A | 2.10" 53.34mm |
0.63" 16.00mm |
0.40" 10.16mm |
1.88" 47.75mm |
0.52" 13.21mm |
1-72 6 threads deep |
Jack/Jack | |
| 65A | 2.00" 50.80mm |
1.00" 25.40mm |
0.50" 12.70mm |
1.80" 45.72mm |
0.80" 20.32mm |
2-56 6 threads deep |
Jack/Jack | |
| 69A | 3.00" 76.20mm |
1.00" 25.40mm |
0.75" 19.05mm |
2.80" 71.12mm |
0.80" 20.32mm |
2-56 6 threads deep |
Jack/Jack | |
| 720A | 5.03" 127.76mm |
1.42" 36.07mm |
0.75" 19.05mm |
4.00" 101.60mm |
1.00" 25.40mm |
6-32 8 threads deep |
Jack/Jack | |
| 65B | 2.00" 50.80mm |
1.00" 25.40mm |
0.75" 19.05mm |
1.80" 45.72mm |
0.80" 20.32mm |
2-56 6 threads deep |
Jack/Jack | |
| 69B | 3.00" 76.20mm |
1.00" 25.40mm |
0.75" 19.05mm |
2.80" 71.12mm |
0.80" 20.32mm |
2-56 6 threads deep |
Jack/Jack | |
| 720B | 5.03" 127.76mm |
1.42" 36.07mm |
0.75" 19.05mm |
4.00" 101.60mm |
1.00" 25.40mm |
6-32 8 threads deep |
Jack/Jack |
Terminal Marking: The input terminal is marked as the reference terminal if the input and output are different impedances. Cases are of cold rolled steel, aluminum and in some instances brass. The dimensional tolerances are +/-0.01" typically. All dimensions are referenced from the center line. Filters should be mounted clear of power transformers and other strong magnetic fields. Filters require external resistive terminations.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
