| Case No. | A | B | C | T | S | Terminal Dia. |
| 484 | 0.80" 20.32mm |
0.40" 10.16mm |
0.40" 10.16mm |
0.20" 5.08mm |
0.20" 5.08mm |
0.030" 0.762mm |
Pin 1 is the input and is located under the part number marking. Pin 5 is the output and is in the opposite corner. Common and case are connected to pins 2, 3, 4, 6, 7 and 8. Pins 2, 3, 4, 6, 7 and 8 must all be connected to ground.
| Case No. | A | B | C | T | S | Terminal Diameter |
| 585 | 0.80" 20.32mm |
0.50" 12.70mm |
0.50" 12.70mm |
0.10" 2.54mm |
0.30" 7.62mm |
0.018" 0.457mm |
Pin 1 is the input and is located under the part number marking and the corner is square. Pin 7 is the output. Common and case are connected to pins 2, 4, 6 and 8 through 14. Pins 2, 4, 6 and 8 through 14 must all be connected to ground. Positions 3 and 5 are blank.
Marking consists of TTE's trademark name and part number. The terminals are not marked. The part number is above reference pin 1. Cases are cupro nickel, per AASTM B122, alloy 715-70% copper, 30% nickel. The dimensional tolerances are +/-0.01" typically. All dimensions are referenced from the center line.
Filters should be mounted clear of power transformers and other strong magnetic fields. Filters require external resistive terminations.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
